Compound 3840 Yellow
Compound 3840 Yellow
Compound grade Ro 3840 UA normal
Rotational grade polyethylene compound is a combination of best quality rotation polymer and color additives (titanium dioxide or colored pigment) in the form of powder with a maximum powder size of 800 microns with suitable powder dispersion for rotational molding.
Compound 3840 Yellow Specifications
PROPERTY:MELT FLOW INDEX (190 °C, 2.16 Kg)
UNIT:g/10 min
TEST METHOD:ASTM D-1238
TYPICAL VALUE:4
PROPERTY:DENSITY
UNIT:gr/3 cm
TEST METHOD:ASTM D-1505
TYPICAL VALUE: 0.938
PROPERTY:Color pigments and other mineral addetives
UNIT:%
TEST METHOD:-
TYPICAL VALUE:<3
PROPERTY:YELLOWNESS INDEX
UNIT:-
TEST METHOD:ASTM E-313
TYPICAL VALUE:-1
PROPERTY:WHITENESS INDEX
UNIT:-
TEST METHOD:ASTM E-313
TYPICAL VALUE:60
PROPERTY:CONTAMINATION
UNIT:No
TEST METHOD:BP-137
TYPICAL VALUE : 5
PROPERTY:VICAT SOFTENING POINT
UNIT:°C
TEST METHOD:ASTM D-1525
TYPICAL VALUE 115
PROPERTY:TENSILE STRESS AT YEILD
UNIT:MPA
TEST METHOD:ASTM D-638
TYPICAL VALUE: 15
PROPERTY:ELONGATI N AT BREAK
UNIT:%
TEST METHOD:ASTM D-638
TYPICAL VALUE: 900
PROPERTY:ESCR(I G EPAL10% F50,23 C)
UNIT:HR
TEST METHOD:ASTM D-1693
TYPICAL VALUE: 350
PROPERTY:CHARPY IMPACT
UNIT:Kj/M2
TEST METHOD:ASTM D-6110
TYPICAL VALUE: 18
Rotational grade polyethylene compound is a combination of best quality rotation polymer and color additives (titanium dioxide or colored pigment) in the form of powder with a maximum powder size of 800 microns with suitable powder dis
Compound 3840 Yellow Specifications
PROPERTY:MELT FLOW INDEX (190 °C, 2.16 Kg)
UNIT:g/10 min
TEST METHOD:ASTM D-1238
TYPICAL VALUE:4
PROPERTY:DENSITY
UNIT:gr/3 cm
TEST METHOD:ASTM D-1505
TYPICAL VALUE: 0.938
PROPERTY:Color pigments and other mineral addetives
UNIT:%
TEST METHOD:-
TYPICAL VALUE:<3
PROPERTY:YELLOWNESS INDEX
UNIT:-
TEST METHOD:ASTM E-313
TYPICAL VALUE:-1
PROPERTY:WHITENESS INDEX
UNIT:-
TEST METHOD:ASTM E-313
TYPICAL VALUE:60
PROPERTY:CONTAMINATION
UNIT:No
TEST METHOD:BP-137
TYPICAL VALUE : 5
PROPERTY:VICAT SOFTENING POINT
UNIT:°C
TEST METHOD:ASTM D-1525
TYPICAL VALUE 115
PROPERTY:TENSILE STRESS AT YEILD
UNIT:MPA
TEST METHOD:ASTM D-638
TYPICAL VALUE: 15
PROPERTY:ELONGATI N AT BREAK
UNIT:%
TEST METHOD:ASTM D-638
TYPICAL VALUE: 900
PROPERTY:ESCR(I G EPAL10% F50,23 C)
UNIT:HR
TEST METHOD:ASTM D-1693
TYPICAL VALUE: 350
PROPERTY:CHARPY IMPACT
UNIT:Kj/M2
TEST METHOD:ASTM D-6110
TYPICAL VALUE: 18
persion for rotational molding.
