PE compound SB75 for Blow molding

PE compound SB75 for Blow molding

Polyethylene Compound SB75

Sabico is ready to design customized formulations for its customers’ applications, supported by the Sabico R&D team’s technical capability as well as its
equipment. It is designed and manufactured according to the requirements of the customer’s desired product and compatibility with the different polymer
properties. SABICO blow molding grade compounds under the SABICO brand are suitable for the production of large and small hollow containers, plastic
water tanks and many polyethylene plastic containers in accordance with the most prestigious global standards.
PE Compound SB75, high density polyethylene classified as SB75. Well dispersed titanium dioxide (color pigments) provides excellent resistance to UV
radiation. Long-term stability is ensured by an optimized stabilization system. This product has shown excellent performance for the production of plastic
water tanks, and due to its appropriate strength, it also allows the production of water tanks with lower weight without causing deformation.

PE compound SB75 for Blow molding

*All above mentione d data are typical value s and not to be construed as real specifications. Users should confirm result s by their own tests. For more
information about guaranteed items, please refer to S.S.S. (Standard Sales Sp ecifications ) .

Compound 3840 Blue

ompound is a combination of best quality rotation polymer and color additives (titanium dioxide or colored pigment) in the form of powder with a maximum powder size of 800 microns with suitable powder dis

Compound 3840 Yellow Specifications

PROPERTY:MELT FLOW INDEX (190 °C, 2.16 Kg)

UNIT:g/10 min   TEST METHOD:ASTM D-1238   TYPICAL VALUE:4

PROPERTY:DENSITY

UNIT:gr/3 cm   TEST METHOD:ASTM D-1505    TYPICAL VALUE: 0.938

PROPERTY:Color pigments and other mineral addetives

UNIT:%   TEST METHOD:-    TYPICAL VALUE:<3

PROPERTY:YELLOWNESS INDEX

UNIT:-   TEST METHOD:ASTM E-313     TYPICAL VALUE:-1

PROPERTY:WHITENESS INDEX

UNIT:-   TEST METHOD:ASTM E-313    TYPICAL VALUE:60

PROPERTY:CONTAMINATION

UNIT:No    TEST METHOD:BP-137    TYPICAL VALUE : 5

PROPERTY:VICAT SOFTENING POINT

UNIT:°C      TEST METHOD:ASTM D-1525     TYPICAL VALUE  115

PROPERTY:TENSILE STRESS AT YEILD

UNIT:MPA    TEST METHOD:ASTM D-638     TYPICAL VALUE:  15

PROPERTY:ELONGATI N AT BREAK

UNIT:%          TEST METHOD:ASTM D-638    TYPICAL VALUE:   900

PROPERTY:ESCR(I G EPAL10% F50,23 C)

UNIT:HR  TEST METHOD:ASTM D-1693   TYPICAL VALUE:   350

PROPERTY:CHARPY IMPACT

   UNIT:Kj/M2

TEST METHOD:ASTM D-6110   

 TYPICAL VALUE: 18   persion for rotational molding.